Stainless steel Y-type filter

Stainless steel Y-type filter

Y-type filter is an indispensable one of the pipeline system of the transmission medium, Y-type filter is usually installed in the relief valve, relief valve, fixed water level valve or other equipment inlet, used to remove impurities in the media , To protect the normal use of valves and equipment. Y-type filter with advanced structure, small resistance, easy to discharge and so on. Y-type filter for media can be water, oil, gas. General water network for the 18 to 30 mesh, ventilation network for the 10 to 100 mesh, through the oil network for the 100 ~ 480 head. Basket filter mainly by the take over, in charge, filter blue, flanges, flange covers and fasteners and other components. When the liquid through the main tube into the filter blue, the solid impurity particles are blocked in the filter blue, and clean the fluid through the filter blue, from the filter outlet.

Y-type filter is a small device to remove a small amount of solid particles in the liquid can protect the normal work of the device, when the fluid into the filter with a certain size filter, the impurities are blocked, and clean filtrate from the filter outlet Discharge, when the need for cleaning, as long as the removable cartridge removed, re-installed after handling can be, therefore, the use of maintenance is very convenient. Y-type filter, also known as decontamination, filtration valve, is an indispensable device for conveying the pipeline system, its role is to filter the mechanical impurities in the sewage rust, sand, liquid a small amount of solid Particles and other filters to protect the equipment on the pipe fittings from wear and clogging, can protect the normal work of the equipment.

Y-type filter is Y-shaped, one end is to make water and other liquid through, one end of the precipitation of waste, impurities, usually it is installed in the relief valve, pressure relief valve, fixed water valve or other equipment, The role is to remove impurities in the water, to protect the normal operation of the valve and the role of the filter to be treated water from the inlet into the body, the impurities in the water deposited on the stainless steel filter, the resulting pressure. Through the pressure switch to monitor the inlet and outlet pressure changes, when the pressure reaches the set value, the electronic control to the hydraulic control valve, drive the motor signal, causing the following actions: motor driven brush rotation, cleaning the filter, while the control valve open The entire cleaning process only lasts for several tens of seconds. When the cleaning is finished, the control valve is closed and the motor stops rotating. The system returns to its original state and starts to the next filtration process. After the equipment is installed, it is debugged by the technical personnel, set the filtration time and the cleaning conversion time, the water to be treated enters the body from the inlet, the filter starts to work normally.

Product Categories

1. Air filter to pollute the air is clean to the production and living conditions required, that is, to achieve a certain degree of clean air.

2. Liquid filter to be contaminated liquid is clean to the production and living conditions required, that is, to achieve a certain degree of liquid cleanliness.

3. Network filter through the set to block spam, make use of computer information on the screen as much as possible to meet the requirements. The same principle of absorption will be different colors of light separation

4. Light filter, the unwanted light absorption. Above that should be a net filter, in fact, there are many kinds of filters, such as laminated filters, sand filters, carbon filters, etc., the main principle is the use of filter media pore diameter smaller than the media cut- Of course, some filter media also has special effects such as adsorption. Most of the filter backwashing is not so much trouble, as long as the water from the filtered water into one end of the reverse backwash filter medium can achieve a good backwash effect. This type of valve in the pipeline should generally be installed horizontally.